Al-Adham Feed Equipment
Al-Adham Feed Equipment
Factory — El-Manawat Office — Haram | El-Mariouteya Sales: 01113739996 Sales (line 2): 01064333341 Customer service: 01031975535
Production line details

Feed Production Line 5 t/h

An industrial 5 t/h production line for medium and large mills.

5 t/h Capacity
4 bins + electronic scale Dosing system
Pelleted Feed type
Feed Production Line 5 t/h
In short

Feed Production Line 5 t/h An industrial 5 t/h production line for medium and large mills.

  • Capacity5 t/h
  • Dosing system4 bins + electronic scale
  • Feed typePelleted
  • Number of stages15 stages
From raw material to the sack

How the feed moves through the line

Every stage and its machine. Tap any machine for its specifications and sizes.

Intake and grinding

First screw conveyor See Screw Conveyors for Feed Mills

Moves raw material from the intake point up to the feed bin.

Raw material bin See Feed Silos

Sits directly above the hammer mill and feeds it by gravity.

Feeder

Between the bin and the mill — it sets the feed rate so the mill neither chokes nor runs empty.

Hammer mill See Feed Hammer Mills

Grinds the raw material to the fineness the feed type calls for.

Dosing and mixing

Bucket elevator See Bucket Elevators for Feed Mills

Lifts the ground material to the dosing bins, with a distribution screw above them.

Elevator or screw — depending on the floor area and the layout drawing

Dosing bins See Feed Silos

One bin per ingredient; the dosing system sets each ingredient’s share of the mix.

Available as 2, 4 or 6 bins

Dosing scale See Feed Dosing Scales

Weighs each ingredient to its exact share before mixing.

Under the bins in a 4-bin system, in front of them in 2- and 3-bin systems

Airlock See Airlocks for Feed Mills

Between the scale and the mixer when the scale sits above it — it stops air blowback.

Fitted when the scale sits above the mixer

Mixer See Feed Mixers

Blends the mix to full homogeneity before pelleting.

Pressing and cooling

Transfer to the press See Screw Conveyors for Feed Mills

From the mixer to the press bin.

Screw or elevator — depending on whether the layout is horizontal or vertical

Pellet press See Feed Pellet Mills

Turns the mix into pellets of the required size.

Not fitted on mash (fine feed) lines

Cooler See Feed Coolers

Brings the pellet temperature down and sets its hardness after pressing.

Directly under the press, or fed by a belt conveyor depending on the layout

Crumbler For poultry feed See Feed Crumblers

Breaks the pellet down to chick size. Not fitted on cattle feed lines.

Finishing and bagging

Screen See Feed Screens

Sorts out the required size and returns fines to the press. Sits above the product bin.

Reached by elevator or belt — depending on capacity and layout

Bagging See Packing Machines for Feed Mills

By hand from under the product bin, or with an automatic bagging machine.

Manual or automatic

5 Ton/Hour Feed Production Line

A feed production line with a capacity of up to 5 tons per hour, running a system of 4 batching bins and an electronic scale. The feed goes through grinding, weighing, mixing, pelleting, and cooling, then screening and packing, with the option to add a crumbler when producing poultry feed.

Production Line Specifications

SpecificationDetails
Production capacity5 tons/hour
Batching system4 batching bins + electronic scale
Type of feedPelleted feed
Conveying systemScrew conveyors and bucket elevators, depending on the line design
CrumblerAdded when needed to produce poultry feed
PackingManual or automatic, depending on the setup

Production Line Components

  1. First Screw Conveyor: Moves the raw materials from the receiving point to the raw material bin.
  2. Raw Material Bin: Receives the raw materials and feeds the grinder.
  3. Feeder: Regulates the entry of raw materials into the grinder.
  4. Grinder: Grinds the raw materials to the fineness suited to the required type of feed.
  5. Bucket Elevator: Lifts the ground material to the batching bins, depending on the line design.
  6. Batching Bins: The line has 4 bins, each dedicated to one of the raw materials used in the feed formula.
  7. Batching Scale: Weighs the materials according to the ratios set in the feed formula.
  8. Air Gate: Used between the scale and the mixer when the scale is installed above the mixer.
  9. Mixer: Mixes the materials after they are weighed to obtain a homogeneous mix before pelleting.
  10. Moving the Mix to the Pellet Mill: Moves the mix from the mixer to the pellet mill bin using a screw conveyor or a bucket elevator, depending on the line design.
  11. Pellet Mill: Compresses the mix and shapes it into pellets of the required size.
  12. Cooler: Lowers the temperature of the pellets after pelleting.
  13. Crumbler for Poultry Feed – Optional: Crumbles the pellets to a size suited to poultry feed, and can be left out when producing pelleted feed without crumbling.
  14. Screener: Separates the fines from the final product, and the fines can be returned to the pelleting stage.
  15. Packing: The feed is packed from the bottom of the product bin, manually or with an automatic packing machine, depending on the setup.

How the Production Line Works

The raw materials go through the following stages:

  1. Moving the raw materials to the raw material bin.
  2. Feeding the grinder and grinding the raw materials.
  3. Lifting the ground material to the batching bins.
  4. Weighing the materials according to the feed formula.
  5. Mixing the ingredients inside the mixer.
  6. Moving the mix to the pellet mill bin.
  7. Pelleting the feed and shaping it into pellets.
  8. Cooling the pellets after pelleting.
  9. Crumbling the pellets when needed to produce poultry feed.
  10. Screening the product and separating the fines.
  11. Packing the final feed.

The 4-Batching System

The line relies on 4 batching bins and an electronic scale, so that the materials are prepared and weighed according to the ratios required in the feed formula before they move to the mixer.

Producing Pellets and Crumbled Feed

The line produces feed as pellets after pelleting and cooling. When crumbled poultry feed is needed, the crumbler is added after the cooler and before screening.

Line Layout Inside the Plant

The equipment layout is determined according to the plant area and the installation plan, with the way materials are moved between stages chosen using screw conveyors or bucket elevators depending on the nature of the site.

Request a 5 Ton/Hour Feed Production Line

Contact Al-Adham to determine the production line equipment suited to your project, and to learn the sizes and technical specifications according to the plant design and production needs.

Technical data

Line specifications

Specification Value
Capacity 5 t/h
Dosing system 4 bins + electronic scale
Feed type Pelleted
Number of stages 15 stages
Why this line

What it gives you

  • Electronic dosing with four bins — exact ratios, no hand estimation.
  • Continuous running with no stops between stages.
  • Designed around your floor area and layout, horizontal or vertical.
  • Every machine built in our own works — spare parts always available.
  • Installation, commissioning, operator training and after-sales follow-up.
See for yourself

The line running

Commentary in Arabic — the machine speaks for itself

Want a line like this?

Send us your floor area and the capacity you need, and we will come back with a drawing and a price.

Request a Quote See the other lines
FAQ

Quick answers to the most common questions

What is Feed Production Line 5 t/h?
An industrial 5 t/h production line for medium and large mills.
Does Feed Production Line 5 t/h include installation and commissioning?
Al-Adham supplies, installs, commissions and trains your operators, alongside maintenance and after-sales service. Set out the scope you need when you request a quote.
How do I know whether Feed Production Line 5 t/h suits my project?
A production line is chosen by the capacity you need in tonnes per hour, the type of feed (poultry, livestock or fish) and the space available on site. Contact us on WhatsApp at 01113739996 or send a request from the quote page. The sales team replies during working hours: Saturday to Thursday, 9 am to 5 pm.
Contact Us