Inside the works

We build the machine end to end

Our works in El-Menawat: from choosing the steel to a machine ready to run. Hammer mills, presses, mixers, coolers, screens and crumblers — built here, not imported and resold.

About the works

About Al Adham

Building a feed mill with Al Adham is a guarantee of success

Since 2010 our engineering team has designed and developed solutions that ensure the highest quality, the highest levels of safety and optimal performance in production. We build plants of every size, from 1.5 tons/hour up to 10 tons/hour, covering engineering, manufacturing, assembly and after-sales service.

Learn About the Company

15+

Years of Experience

10 tons

Varied Production Capacities

Knowledge Centre

Feed equipment and production lines from the Al Adham factory

15+ Years in Feed Equipment

Al Adham Feed Equipment Factory

Complete solutions for equipping feed mills, from design to operation

We build feed mills of every size, from small plants with a capacity of 1.5 tons/hour to larger projects reaching 10 tons/hour, covering engineering, manufacturing, assembly and after-sales service.

01Engineering design suited to the nature of the project and the available space.

02Manufacturing and assembly of robust equipment built for daily operation.

03Installation, commissioning and after-sales technical support to keep production stable.

Request a Quote

Al Adham Equipment

Equipment Gallery

View Products

Coolers

Bring down the temperature of the feed after pelleting and improve the stability and quality of the final product.

3-Ton Pellet Mill

A practical solution for medium-sized projects that need steady output and economical operation.

1.5-Ton Pellet Mill

A sound choice for starting a feed mill project with balanced output and a smaller operating footprint.

Screen

Separates impurities and fines to raise the quality of the mix and keep the product consistent.

Mixer

Homogeneous mixing of the ingredients so nutrients are distributed precisely throughout the feed.

Hammer Mill

Efficient grinding of raw materials before mixing and pelleting, to suit the type of feed required.

Services You Can Rely On

From project study to routine maintenance

✦

Consultation

We assess the needs of the project, the target products and the required output before work begins.

⚙

Installation

We set the equipment up on site and test the main operating stages to reach the best possible performance.

▣

Design

We offer practical, effective solutions built on engineering experience in planning production lines.

↻

Preventive Maintenance

Routine maintenance that helps extend the life of the equipment and reduce unexpected breakdowns.

▤

Manufacturing

Equipment manufactured by a specialised team in continuous cooperation with experienced engineers.

＋

Accessories and Spare Parts

We supply the spare parts and accessories needed to run the plant efficiently and without interruption.

Samples of Our Work

Photos from Installation and Commissioning

Contact Us

Al Adham Products

Product Categories

View All

Main Products

The core machines in a feed production line.

Sub Products

Auxiliary equipment that completes a feed line — silos, conveyors, scales, blowers and packing.

Feed Pellet Mills

Feed pellet mills in a range of capacities.

Feed Hammer Mills

Hammer mills for grinding grain and raw materials.

Feed Mixers

Horizontal mixers for uniform feed blends.

Feed Coolers

Coolers that preserve pellet quality after pelleting.

Feed Screens

Feed screens for cleaning and grading.

Feed Crumblers

Crumblers for setting pellet size.

غربال فرز 3 مراحل

Feed Mill Equipment

Featured Products

Main product

Feed Pellet Mills

Function: Pelleting the mash into feed pellets

Feed pellet mills rated 1.5 and 3 t/h, with steam conditioners, 250 and 320 mm dies, stainless steel contact parts and German FAG bearings.

Request a quote

Details Quote

Main product

Feed Mixers

نوع المعدة: خلاط أعلاف أفقى

Horizontal feed mixers in three standard sizes, blending ground grain, soy and additives in three to five minutes. Larger sizes built to order.

Request a quote

Details Quote

Main product

Feed Hammer Mills

Function: Grinding raw materials (maize, soybean, bran, barley, etc.)

Feed hammer mills in three models from 15 to 60 hp, grinding 1 to 8 t/h, with heat-treated steel hammers and German SKF bearings.

Request a quote

Details Quote

Main product

Feed Coolers

نوع المعدة: مبرد أعلاف

Square feed pellet coolers in four sizes from 100×100 to 200×200 cm, pulling heat and moisture out of pellets after the mill so they stay hard in storage.

Request a quote

Details Quote

Main product

Feed Screens

نوع المعدة: غربال أعلاف راحوى (ترددى)

Oscillating feed screens in three sizes from 75×150 to 125×250 cm, separating fines and oversize so only uniform pellets reach the bag.

Request a quote

Details Quote

Main product

Feed Crumblers

نوع المعدة: مفتت أعلاف (كرامبلر)

Feed crumblers in three sizes from 60 to 100 cm, breaking pellets after cooling to the size each growth stage needs.

Request a quote

Details Quote

Production Lines

Complete Production Solutions

Feed Production Line 1.5 t/h

A practical solution for small and medium projects, with a capacity of about 1.5 t/h.

Details

Feed Production Line 1.5 t/h — Single Dosing

An economical single dosing-scale system at 1.5 t/h — lower cost and simpler operation.

Details

Feed Production Line 1.5 t/h — Double Dosing

A double dosing system at 1.5 t/h for precise control over raw material ratios.

Details

The Services We Offer

Services You Can Rely On

Consultancy

Free consultancy to help you choose the right equipment and feed production line before you start.

Complete Production Line Installation

A full installation and commissioning service for feed production lines, so your mill is ready to work from day one.

Project Design

Complete engineering design for feed mills, setting out the layout of equipment, silos and electrical systems to suit your space and required capacity.

Maintenance and Warranty

A comprehensive warranty, professional maintenance and fast technical support to keep your mill running efficiently.

What Our Clients Say

What our clients have said about us

Excellent customer service and the trust and cooperation built between the company and its clients have always been the solid foundation that allowed Al Adham to become a leading brand in the modern feed production equipment industry.

Our clients on the Al Adham feed equipment factory — Commentary in Arabic — the machine speaks for itself

Excellence in Service

Our clients' trust is the strongest testament to the quality of our equipment

We provide professional maintenance and fast technical support to every client, drawing on more than 15 years of experience in feed equipment and production lines.

Build Quality Robust, practical equipment suited to daily operation.

Technical Support Follow-up and maintenance that stay with the client after installation and commissioning.

Long-Term Trust We work to build a lasting relationship with the client, from design through to after-sales.

Contact Us

Blog and Knowledge Centre

View All

معدات الأعلاف

2025/04/05

Hammer Mills in Animal Feed Plants

How the hammer mill prepares raw materials and turns them into particles the production line can work with, efficiently and consistently.

Read the article

Screens in Feed Mills — Why They Matter and What They Do

Feed equipment

2025/04/05

Screens in Feed Mills — Why They Matter and What They Do

A plain explanation of why screening matters for separating impurities and setting particle size before mixing and pelleting.

Read the article

معدات الأعلاف

2025/04/05

Feed Mixers in Animal Feed Plants

What you need to know about mixing ingredients accurately to get a uniform feed that holds its nutritional value.

Read the article