Al-Adham Feed Equipment
Al-Adham Feed Equipment
Factory — El-Manawat Office — Haram | El-Mariouteya Sales: 01113739996 Sales (line 2): 01064333341 Customer service: 01031975535
Product Details

Screw Conveyors for Feed Mills

Feed mill screw conveyors that pull raw material from storage into the line, move ground material to the dosing scale and feed the pellet mill tank without clogging. Built to the length and diameter each position needs.

In short

Screw Conveyors for Feed Mills is manufactured by the Al-Adham Feed Equipment Factory (code S002). Build material: Rugged steel construction built for continuous running. Feed mill screw conveyors that pull raw material from storage into the line, move ground material to the dosing scale and feed the pellet mill tank without clogging. Built to the length and diameter each position needs. Used in Conveying grain and ground material, Linking silos to machines.

  • Conveying typeHorizontal or inclined depending on the line layout
  • How it worksAn internal helical shaft moves material along the conveyor body
  • UseMoving material between hammer mills, mixers and silos
  • ManufacturingSeveral lengths and diameters to suit the project
Screw Conveyors for Feed Mills

Screw Conveyors for Feed Mills

The screw conveyor is the artery of a feed line: it pulls raw material from storage into the line, moves ground material to the dosing scale and feeds the pellet mill hopper.

How it works

A shaft turns inside a tube with a helical flight pushing material ahead of it. Simple in principle, which is why it is the most used conveyor on a feed line: a motor and two bearings, and it runs for years on little maintenance.

Where it is used

  • Pulling raw material from storage into the line, continuously and without clogging.
  • Moving ground material from the hammer mill to the dosing scale.
  • Feeding the pellet mill hopper — an 8 inch screw on our standard lines.

When a bucket elevator is better

A screw conveys horizontally or on a limited incline. The steeper the incline the lower the efficiency and the higher the power draw, because part of the material falls back. Long vertical lifts belong to a bucket elevator.

Warranty

The steel structure carries a ten-year warranty. Wear parts — hammers, dies and press rollers — carry one year, since they are replaced through normal use. Motors carry their own manufacturer’s warranty.

Tell us your line capacity and feed type and we will recommend the right size. Request a quote.

  • Conveying type: Horizontal or inclined depending on the line layout
  • How it works: An internal helical shaft moves material along the conveyor body
  • Use: Moving material between hammer mills, mixers and silos
  • Manufacturing: Several lengths and diameters to suit the project
Request a Quote All Products
Technical specifications

Every product detail in one table

Specification Value
Conveying type Horizontal or inclined depending on the line layout
How it works An internal helical shaft moves material along the conveyor body
Use Moving material between hammer mills, mixers and silos
Manufacturing Several lengths and diameters to suit the project
Material Rugged steel construction built for continuous running
Operating strengths Even feeding, less waste and less floor space
Applications

Suitable applications

  • Conveying grain and ground material
  • Linking silos to machines
  • Cutting manual handling inside the mill
  • Medium and large feed mills and production lines
  • Linking the grinding, mixing, pelleting and packing stages
  • Reducing losses and smoothing material flow through the line
Suggestions

Related products

Bucket Elevators for Feed Mills
Sub product

Bucket Elevators for Feed Mills

Function: Lifting material vertically between line levels

Bucket elevators that lift grain and raw material vertically between stages, built to the height and throughput of each line.

Request a quote
Details Quote
Feed Belt Conveyor
Sub product

Feed Belt Conveyor

Function: Moving feed or bags between operating stages

Belt conveyors that move pellets between stages and bags after packing, on a heavy steel frame, built to the length and width each position needs.

Request a quote
Details Quote
Cyclones for Feed Mills
Sub product

Cyclones for Feed Mills

Function: Separating dust and fine particles from the air

A feed mill cyclone that separates fine dust from the air stream by centrifugal force, part of the cooling unit and of the aspiration and pneumatic conveying system.

Request a quote
Details Quote
Feed Dosing Scales
Sub product

Feed Dosing Scales

Function: Weighing and dosing raw materials before mixing

Dosing scales that weigh each ingredient before mixing so the corn, soy and additive ratios hold from batch to batch, with an automatic pneumatic gate to the mixer.

Request a quote
Details Quote
FAQ

Quick answers to the most common questions

What are the uses of Screw Conveyors for Feed Mills?
Main applications: Conveying grain and ground material, Linking silos to machines, Cutting manual handling inside the mill, Medium and large feed mills and production lines, Linking the grinding, mixing, pelleting and packing stages, Reducing losses and smoothing material flow through the line.
What is the build material of Screw Conveyors for Feed Mills?
Material: Rugged steel construction built for continuous running.
What are the key technical specifications of Screw Conveyors for Feed Mills?
Conveying type: Horizontal or inclined depending on the line layout, How it works: An internal helical shaft moves material along the conveyor body, Use: Moving material between hammer mills, mixers and silos, Manufacturing: Several lengths and diameters to suit the project, Material: Rugged steel construction built for continuous running, Operating strengths: Even feeding, less waste and less floor space. The full table is shown on the page.
How do I get a price for Screw Conveyors for Feed Mills?
Quote product code S002 when you get in touch. Contact us on WhatsApp at 01113739996 or send a request from the quote page. The sales team replies during working hours: Saturday to Thursday, 9 am to 5 pm.
Contact Us